RESUMO
The accurate calculation of the contribution which provided by clay minerals in coal on methane adsorption not only bares a significant importance for evaluating the effectiveness of acid stimulation in improving permeability and estimating the coalbed methane reserves but also serves a guide for the governance and utilization of methane resources. In this study, hydrochloric acid (HCl) and hydrofluoric acid (HF) were used to remove specific minerals in Qingdong coal samples. We firstly analyzed the mineral compositions of coal samples with different acidification treatments based on the X-ray diffraction (XRD) experiments, together with analysis of the changes in pore morphology and adsorption capacity. The results showed that acidification did not significantly change the shape of the pores, which remained slit-/plate-like pore. However, the altered adsorption capacity of the coal samples was attributed to changes in pore structure and mineral distribution. Acid erosion of mesopores promoted the transition from mesopores to macropores, contributing to an increase of 8.4% and 24.36% in the percentage of macropores in coal samples treated with HCl and HF, respectively. Fractal dimension D1 grew from 2.2193 to 2.3888 and 2.2572, respectively, but D2 decreased from 2.6146 to 2.5814 and 2.5433, indicating an increment in pore surface roughness and a simplification of the pore structure. The mineral richness of the coal seams should be taken into consideration when applying acid stimulation to increase permeability due to that the acidification products may block the passage of gas migration when the mineral content is slight, which can hinder gas extraction. The aim of this study is to quantitatively determine the contribution rate of clay minerals in coal to methane adsorption with a calculation method is provided by combining pore parameters and limit adsorption capacity, resulting in a contribution rate of 15%.
